Beaconplus Devices

Beacon Card

Beacon Card is our hardware solution to solve most of smart RF device requirements using Bluetooth low energy / iBeacon protocol. These devices are resistant to water and dust. Our optimized firmware gives battery life over 4 years with its built-in battery. Its credit card size makes it convenient to be used across any industry sector

Property Value Unit
Radio Frequency band 2.4 GHz
RF protocol Bluetooth 4.0 smart
Transmitting power 0 or -20 dB
Receiver sensitivity -88 dB
Size & Weight Width 55 mm
Height 87 mm
Thickness 4 mm
Weight 16 gm
Power Built-in battery 800 mA
  Case Material ABS plastic  
Operating Temperature -40 to +85 °C
Operating Voltage 3 V
Water-dust resistance IP 65  
Battery life* 4 Years
*Depends upon transmission interval and transmission power.

Beacon Tag

BeaconPlus Tag is a small wireless Bluetooth low energy device that broadcasts radio signals, which most of the BLE/iBeacon enabled devices can detect. You can determine precise location of your customer when they are in the range of your BeaconPlus beacon and exchange targeted information with him securely. BeaconPlus beacon has a long life of up to 2 years with a single coin cell.

Property Value Unit
Radio Frequency band 2.4 GHz
RF protocol Bluetooth 4.0 smart
Transmitting power 0 or -20 dB
Receiver sensitivity -88 dB
Size & Weight Width 46 mm
Height 50 mm
Thickness 7 mm
Weight 9 gm
Power Battery CR2032
  Case Material ABS plastic  
Operating Temperature -40 to +85 °C
Operating Voltage 3 V
Battery life* 2 Years
*Depends upon transmission interval and transmission power.

BeaconSense

BeaconSense is an intelligent hardware using Bluetooth low energy technology which can detect and collect information from surrounding beacons. This device is having communication capability built over Bluetooth low energy protocol, which is used to transfer the collected information to the cloud. BeaconSense have built-in storage capability to keep collected information.
Property Value Unit
Radio RF protocol Bluetooth 4.0 smart
Frequency band 2.4 GHz
Transmitting power 0 or -20 dB
Receiver Sensitivity -88 dB
Size and Weight Length 115 mm
Width 63 mm
Height 12 mm
Color White  
Weight 50 gm
Power Battery CR2032x2  
5 V D C  
Rechargeable battery 1100mA  
Memory Flash No  
RAM 48 KB
EEPROM 1 Mbit
  Case material ABS plastic  
Operation Operating temperature -40 to +85 °C
  Operating voltage 3 V

BeaconLink

BeaconLink is pinmicro’s Bluetooth-wifi gateway. This Smart Bluetooth gateway acts as a communication bridge between beacon network and the cloud. All the properties of the beacon network can be set from remote cloud.
Property Value Unit
Radio:Bluetooth RF protocol Bluetooth 4.0 smart
Frequency band 2.4 GHz
Transmitting power 0 or -20 dB
Receiver Sensitivity -88 dB
Radio : Wifi RF protocol 802.11 b/g/n
Frequency band 2.4 GHz
Transmitting power 25 dB
Size and Weight Length 115 mm
Width 63 mm
Height 12 mm
Color Black  
Weight 50 gm
Power 5V DC
Memory Flash 1 Mbit
RAM 48+16 KB
EEPROM 1 Mbit
  Case material ABS plastic  
Operation Operating temperature -40 to +85 °C

CloudSense

CloudSense is Pinmicro’s new series of beacon scanner which can directly connect with BeaconPlus cloud. CloudSense is using Bluetooth low energy technology scanner which can detect and collect information from surrounding beacons. This device is having communication capability built over Wifi 2.4GHz protocol, which is used to transfer the collected information to the cloud. CloudSense have built-in storage capability to keep collected information.
Property Value Unit
Radio:Bluetooth RF protocol Bluetooth 4.0 smart
Frequency band 2.4 GHz
Transmitting power 0 or -20 dB
Receiver Sensitivity -88 dB
Radio : Wifi RF protocol 802.11 b/g/n
Frequency band 2.4 GHz
Transmitting power 25 dB
Size and Weight Length 115 mm
Width 63 mm
Height 12 mm
Color Black  
Weight 50 gm
Power 5V DC
Memory Flash 1 Mbit
RAM 48+16 KB
EEPROM 1 Mbit
  Case material ABS plastic  
Operation Operating temperature -40 to +85 °C

SerialSense

SerialSense is Pinmicro’s new beacon scanner which can directly communicate with USB port. SerialSense is using Bluetooth low energy technology scanner which can detect and collect information from surrounding beacons. Serial port communication ability opens new business area for beacons.
Property Value Unit
Radio:Bluetooth RF protocol Bluetooth 4.0 smart
Frequency band 2.4 GHz
Transmitting power 0 or -20 dB
Receiver Sensitivity -88 dB
Serial port 115200, 8,1, N
Size and Weight Length 115 mm
Width 63 mm
Height 12 mm
Color Black  
Weight 50 gm
Power USB Power
Memory Flash 1 Mbit
RAM 48+16 KB
EEPROM 1 Mbit
  Case material ABS plastic  
Operation Operating temperature -40 to +85 °C